Skip directly to content


NEW 1932 Ford Subrail Extension

on Mon, 06/15/2015 - 15:13

        1932 Ford Subrail Extension                   
                  $140 a pair   

2 Door or 4 Door, 5 Window Coupe, and Cabrolet.
Made of 12 guage, the CRS
Made in the USA

NEW 1947-1953 Chevy Truck Floorboard

on Mon, 06/15/2015 - 14:51

Chevy Truck Floorboard 

    #751003-R   $325 

To match up with our new firewall #75100-R
to give you more floor space for your feet. 

This new floorboard is made at the request of truck builders out there, 
we still make the original 751003 floorboards as well. 


NEW 1947-1953 Chevy Truck Firewall

on Mon, 06/15/2015 - 14:47

   1947-53 Chevy Truck Firewall
         751000-R   $395

This was built to allow the brake booster and Master Cylinder to be mounted on the firewall, also will give you more floor space.

This firewall matches our New floorboard that also enables more foot room.

This new firewall is made at the request of truck builders out there, we still make the original 751000 firewalls. Made in the USA

Chevy Trucks Inner Cowl Patch

on Mon, 06/15/2015 - 14:39

    Simply Bitchin’ Made in the USA

   #751024   $30 for the pair.  

1947 -1954 Chevy Trucks Inner Cowl Patch


NEW 1940-1947 Ford Truck Dashboard.

on Mon, 06/15/2015 - 14:25

Simply Bitchin’ Made in the USA   

            #41019   $300

      1940-1947  Ford Truck Dashboard    

Ford Car Deep Wheel Well Kits

on Fri, 06/12/2015 - 01:45

 Our deep wheel well kits will help you eliminate tire interference often encountered with those wide pro street tires, off-set wheels, independent suspension or normal body roll on sedans. Our wheel wells come in standard width of 8”. Deeper wheel wells can be special ordered for an additional cost of $35.00

1928-1940 Ford Car Deep Wheel Wells
28'-29' Sedan or Phaetons 16" 26" 8" 281023 $280.00
28'-29' Sedan or Roadster
16 1/4" 35" 8" 281024 $280.00
30’-31’ Sedan 16" 28 1/2" 8" 301019 $280.00
32’ Coupe or Roadster 16 1/8" 28 1/2” 8" 321028 $280.00
32’ Sedan 13 7/8" 34" 8" 321092 $280.00

Universal Deep Wheel Wells

on Tue, 09/30/2014 - 23:29

If You Plan On Putting Wide Wheels And Tires On Your Car or Pro-Streeting It, We Have Just What You Need.
Our Universal Deep Wheel Well Kit (No.901010 @$295  ) Was Designed Just For That Purpose.

These 18 Gauge Cold Rolled All Steel Wheel Wells Are 36” From End To End And A Full 14” Deep. You Can Install These Beauties In As Deep As You Like For Your Particular Project. We make the Absolute Bitchin' Parts for YOUR Custom Rod!
Don't forget to check out our other 1928 -1940 Ford Deep Wheel Wells

Universal All Purpose Floor Kit

on Sat, 09/27/2014 - 23:07

After many requests for FB for cars other than Fords and Chevys, We finally had time to design and manufacture an All Purpose Floor Kit.
The one thing we noticed over the years is that most cars look remarkably alike without the floor pans. The exception being width and outside perimeter shape of the different bodies.  With this in mind, we designed the Kit from the center line out.  There are (2) Kits available: #901030 - Front  and #901035 - Rear

#901030 - Front  The Front Kit Starts at the FW and goes back towards the rear approximately 22” to 26” depending on your car’s Toe Plate Angle.